Does Polynucleotide Skincare Reduce Fine Lines and Wrinkles? Pure Tone Aesthetics

Does Polynucleotide Skincare Reduce Fine Lines and Wrinkles?

Polynucleotides and wrinkles — what to expect (and what not to)

If you’re searching “polynucleotide serum for wrinkles” or “polynucleotides for fine lines”, you’re probably not looking for vague promises. You want a straight answer: will this actually help, and how long does it take?

This page is written for that moment — when you’re building an anti-ageing routine but you want it to feel realistic. No 12-step “skin cycling” complexity, no dramatic claims. Just a clear explanation of what fine lines are, what typically makes them look worse, and where polynucleotides fit in a routine designed to improve the appearance of lines over time.

New to the category? Start with the pillar guide first: Polynucleotide Skincare Explained: What It Is, How It Works & How to Use It.

Do polynucleotides help with fine lines and wrinkles?

They can — but it helps to understand which lines you’re trying to improve and what your routine is missing.

Most “wrinkles” people notice day-to-day fall into two buckets:

  • Dehydration lines (skin looks creased, tight, or crinkly — often worse after travel, cold weather, stress, or a run of strong actives).
  • Expression lines / structural lines (areas that crease with movement over years — forehead, crow’s feet, smile lines).

Polynucleotide skincare is typically most helpful for the first bucket — and for improving overall skin quality so the face looks smoother and more “rested”. When skin holds hydration better and the barrier behaves more consistently, fine lines often look less obvious, especially in the morning and under makeup.

What a good result usually looks like

  • Skin looks more even and smoother up close
  • Makeup sits better (less “catching” on dry areas)
  • Lines caused by dryness look softer
  • Overall elasticity and “bounce” look improved over time

This is still skincare — it’s about supporting the look of skin over time, not an instant “wrinkle erase” effect.

Why fine lines appear (and why they look worse some days)

The appearance of fine lines and wrinkles is influenced by more than age alone. Many lines look deeper when skin is:

  • Dehydrated (not holding water well)
  • Barrier-stressed (tight, reactive, sensitised)
  • Over-treated (too many acids/actives too often)
  • Under-supported (missing a consistent moisturiser step)

This is why “anti-ageing” routines that are all actives and no structure often backfire. If your skin is constantly irritated, it rarely looks smoother — it just looks busy, dry, and unpredictable.

Diagram showing hydration, barrier support and texture and elasticity as the foundation of smoother-looking skin 

Where polynucleotides fit in an anti-ageing routine

Think of polynucleotides as the “skin quality” backbone of an anti-ageing routine. Instead of chasing a new active every month, you keep a consistent routine that supports hydration, comfort and the appearance of elasticity — then add stronger actives only if your skin stays stable.

That’s exactly why we built a simple three-product system:

If you use devices, you don’t need to reinvent the wheel — you just keep the order clean and repeatable. (More on that below.)

Simple AM routine for smoother-looking skin

Mornings should be quick. The goal is skin that feels comfortable, looks fresh, and doesn’t start the day already irritated.

AM routine (2–4 minutes)

  1. Cleanse (optional): If you’re oily in the morning or you used heavy products overnight, cleanse lightly using the Foaming Facial Cleansing Gel. If your skin is dry/sensitive, a rinse with lukewarm water may be enough.
  2. Serum: Apply 1–2 pumps of Polynucleotide Serum. Press and smooth gently over face and neck. Give it 30–60 seconds to settle.
  3. Moisturise: Apply an almond-sized amount of Polynucleotide Moisturising Cream. This helps keep skin comfortable and can make fine lines look less obvious simply because the surface stays hydrated and supported.
  4. SPF: Finish with your usual SPF (especially if you use retinoids or acids at night).

Simple PM routine for fine lines and wrinkles

Evening is where routines actually earn their keep — because you’re removing SPF, pollution and the day’s buildup. If you do one thing well, do this part consistently.

PM routine (4–6 minutes)

  1. Cleanse properly: Use the Foaming Facial Cleansing Gel on damp skin. A pea-sized amount is enough. Work into a light lather, massage gently for 30–45 seconds, then rinse thoroughly. Pat dry with a clean towel.
  2. Serum (treatment step): Apply 1–2 pumps of Polynucleotide Serum. Press in gently and let it settle for around a minute.
  3. Moisturiser (seal + support): Apply Polynucleotide Moisturising Cream evenly across face and neck. This is the step that often makes skin look smoother by morning — because the surface stays comfortable, hydrated and less “creased”.

If you use strong actives (retinoids/acids), keep them structured. Many people do best with polynucleotides as the consistent base, then actives on selected nights once skin is stable.

If you use Radiance Pod: order, pacing and “device nights”

On Radiance Pod days, keep things simple and structured. The device needs proper contact and glide, which is why conductor gel comes before skincare.

Radiance Pod routine (structured, not complicated)

  1. Cleanse: Start with clean skin using the Foaming Facial Cleansing Gel. Pat dry.
  2. Apply conductor gel: Use a generous, even layer of Innocera Face-Up Anti-Ageing Conductor Gel on the areas you’re treating.
  3. Device session: Use Radiance Pod as directed. Move steadily. If gel starts to dry, add more (dry gel can drag).
  4. Finish with skincare: Remove excess gel with a soft damp cloth if needed, then apply serum followed by moisturiser.

Device-night rule: avoid piling on strong exfoliating acids the same evening. The best anti-ageing routine is the one your skin can tolerate consistently.

Radiance Pod routine with conductor gel followed by polynucleotide serum and moisturising cream


If you use the Pure Tone Glow LED Face Mask: layering that stays comfortable

LED is a consistency technology. You’ll get more value from a routine that feels easy to repeat than from heavy layering that makes you skip sessions.

LED Face Mask routine (clean, light, repeatable)

  1. Cleanse: Clean skin first using the Foaming Facial Cleansing Gel. Pat dry.
  2. Serum: Apply a light, even layer of Polynucleotide Serum. You don’t need a thick layer for it to be effective in your routine.
  3. LED session: Use your Pure Tone Glow LED Face Mask for the full session. Sit comfortably and let it run without rushing.
  4. Moisturise: Finish with Polynucleotide Moisturising Cream to support hydration and barrier comfort — the foundation of smoother-looking skin over time.

Comparison table: polynucleotides vs HA vs peptides vs retinol (for fine lines)

People often compare ingredients as if one “wins”. In real routines, the better question is: what role does each one play? Here’s a clear way to think about it.

Swipe to compare: On mobile, scroll sideways. The top row and first column stay visible so it still makes sense as you swipe.

A practical comparison for anti-ageing routines: what each ingredient category is commonly used for and how it fits alongside polynucleotides.
Category What it’s commonly used for How it can help lines look better Where it can go wrong How it fits with polynucleotides
Polynucleotides Skin quality routines: comfort, hydration stability, elasticity appearance Dehydration lines often look softer as skin becomes more consistently hydrated and supported Expecting overnight “wrinkle removal” instead of steady improvement Best as a consistent base routine you can keep up long-term
Hyaluronic Acid Hydration support, plumping feel, comfort Lines can look less obvious when the surface is well hydrated Can feel sticky/heavy if over-layered; not a complete routine alone Works well alongside polynucleotides for hydration + comfort
Peptides Smoother look, firmness support, “skin feels bouncier” positioning Can support the appearance of firmness and smoother texture over time Chasing too many peptide blends at once; mixing with lots of other actives can irritate Often complements polynucleotides in skin quality-led routines
Retinoids (retinol/retinal) Texture refinement and “classic” anti-ageing category Can improve the appearance of fine lines over time, especially with consistent use Overuse leads to dryness/irritation, which can make lines look worse temporarily Many people do best using polynucleotides as the comfort base and retinoids on structured nights

How long until you see changes?

Most people notice the “surface” improvements first — skin feels less tight, makeup sits better, the face looks more consistently hydrated. The deeper-looking changes are slower and tied to routine consistency.

A realistic timeline (guide, not a guarantee)

  • Days to 2 weeks: comfort and hydration often feel improved (especially if your barrier was stressed).
  • 3–6 weeks: texture often looks more even; dehydration lines may look softer because skin behaves more consistently.
  • 6–12 weeks: clearer “skin quality” improvements — smoother-looking skin and better elasticity appearance over time.

If you want help choosing the right route (standalone vs device vs LED), use the Interactive Skin Assessment.

Timeline showing gradual improvement in hydration, texture and elasticity appearance in an anti-ageing routine

FAQs

Will polynucleotides remove wrinkles?

Skincare is better thought of as “supports the appearance” rather than “removes”. Polynucleotide routines are typically used to improve skin quality — hydration stability, comfort and elasticity appearance — which can make fine lines look less obvious over time, especially dehydration lines.

Which lines respond best: forehead, crow’s feet or smile lines?

Dehydration-related lines anywhere on the face often improve first because the surface is better hydrated and supported. Deeper expression lines tend to be slower and benefit from consistent routine habits over months.

Can I use the polynucleotide serum morning and night?

Yes. Most people use it once or twice daily as the treatment step. If you also use strong actives, introduce gradually and prioritise comfort — irritated skin rarely looks smoother.

I use retinol — where do polynucleotides fit?

Many people use polynucleotides as the consistent “base” routine, then keep retinol on structured nights (for example, a few evenings per week) once the skin feels stable. If your skin becomes dry or sensitive, simplify and rebuild consistency first.

Do I need the moisturiser if my skin is oily?

Often, yes — just use less. Oily skin can still be dehydrated, and dehydration can make fine lines look more obvious. A thin layer of moisturiser helps keep the surface comfortable and more consistent.

Can I use this routine with Radiance Pod?

Yes. Keep the order structured: cleanse first, then apply conductor gel, complete your Radiance Pod session, then finish with serum and moisturiser.

On device nights, avoid piling on strong exfoliating acids. Comfort and consistency win.

Can I use polynucleotide serum with an LED mask?

Yes. After cleansing, apply a light, even layer of serum, complete your LED session, then moisturise. Keep layers comfortable and repeatable so you don’t start skipping sessions.

How much product should I use?

Cleanser: a pea-sized amount is usually enough. Serum: typically 1–2 pumps for face and neck. Moisturiser: an almond-sized amount, adjusting based on your skin’s comfort.

What if my skin feels tight or looks worse at first?

Tightness usually means your barrier is stressed or you’ve introduced too many changes at once. Simplify: cleanse gently, use serum and moisturiser consistently, and pause strong actives until your skin feels stable again.

How do I choose the right route for my skin?

If you want the simplest start, begin with the standalone routine for 2–4 weeks. If you already use devices, keep the order structured and repeatable. For a personalised recommendation, use the Interactive Skin Assessment.

Final Thoughts

When people say they want “anti-ageing”, they often mean one thing: skin that looks smoother, more rested and more consistently comfortable.

That’s exactly where polynucleotide skincare tends to sit — not as a dramatic overnight fix, but as a routine foundation that supports hydration, barrier comfort and the appearance of elasticity over time.

Keep it simple. Keep it consistent. Then build on it only if your skin stays stable.

Ready to build your anti-ageing routine?

Start with the routine that fits your real life — then keep it up. If you want a personalised recommendation, take the Skin Assessment.

Stay consistent. Stay informed.

We share structured routines, device guidance and practical skin education — the kind you can actually apply in real life.

If you prefer calm, ingredient-led advice over trends and hype, you’ll feel at home.

For skin that makes you look and feel your best.

 

Regresar al blog