Best At Home Skincare Tools | How to Use the Pure Tone Radiance Pod - Pure Tone Aesthetics

Best At Home Skincare Tools | How to Use Radiance Pod

How to Use the Pure Tone Radiance Pod for Visible At-Home Results

Written by the Pure Tone Aesthetics Editorial Team • Last updated

If you want visible results with a smarter routine, the Pure Tone Radiance Pod combines seven proven technologies in one professional-grade at-home skincare tool, paired with a dual-action serum strategy. This page is your step-by-step guide, science explainer and comparison hub — designed to help you get the very best results at home.

Understanding the Science: Energy Skincare & the Dual-Action Approach

Radiance Pod uses gentle forms of energy — RF, EMS, ultrasound, LED, galvanic ion and electroporation — to stimulate skin function while our Radiance Ampoule Anti-Ageing Serum targets fine lines, uneven tone and hydration. Energy readies the skin and improves uptake; the serum provides the actives that do the work. Together, they compound results.

Prefer a deeper dive? Read: The Science of Energy Skincare — How Technology and Serums Work Better Together.

How to Use Pure Tone Radiance Pod (Step by Step)

Start with Clean Skin

Remove makeup, SPF and impurities so energy can work efficiently. For best results, cleanse with the Viveca Ultrasonic Facial Cleansing Brush — ultrasonic + galvanic-ion help lift debris and prime the skin.

Viveca Ultrasonic Facial Cleansing Brush used for deep cleansing and skincare prep
Cleanse first to maximise absorption and comfort.

Apply Radiance Ampoule, Then Face-Up Gel in Sections

Smooth a thin, even layer of Radiance Ampoule Anti-Ageing Serum over the entire face and neck to hydrate, brighten and prepare the skin for energy.

Next, apply a small amount of Face-Up Gel only to the area you are about to treat (e.g., right cheek). Work in sections — right cheek → left cheek → jawline → neck — adding more gel as you move. This keeps the gel fresh and conductive so the Radiance Pod glides smoothly and delivers energy effectively.

Radiance Dual-Action Anti-Ageing Serum applied before device treatment
Serum first for actives; gel section-by-section for optimal glide and conductivity.

Select Your Mode & Intensity

  • Power on: Hold the power button for 2 seconds.
  • Choose a mode: Short-press power to cycle (BT, LT, TT, TC). The LED indicates your selection.
  • Adjust: Set sensitivity and vibration to comfort level before you start.
Pure Tone Radiance Pod 7-in-1 facial tool for lifting and tightening

Treat Using Gentle, Upward Motions

Glide slowly with upward strokes to encourage lifting. Pause briefly on areas that need extra attention (jawline, cheek contour, forehead). Always keep a light, even contact with fresh gel.

Using Radiance Pod with gentle upward strokes along the cheek and jawline

Understanding Each Mode

  • Boosting (BT): Helps topical absorption; supports elasticity.
  • Lifting (LT): Aids visible lift and tone.
  • Tightening (TT): Focuses on firmness and fine lines.
  • Total Course (TC): Cycles all modes for a complete session.

Routine & Expected Results

Use daily. Most users notice immediate glow and smoother feel; visible lifting/firming typically builds with consistent use over several weeks. Results vary by skin type and routine consistency.

Not sure which skincare tool is right for you?

Our quick skin assessment helps identify the technologies and routine best suited to your skin goals.

Take the 2-Minute Skin Assessment

Ready to start?

Pair Radiance Pod with our dual-action serum strategy for best outcomes.

Radiance Pod vs Other At-Home Devices

Radiance Pod brings multiple technologies together in one device, designed for a high feature-to-price ratio and maximum routine efficiency.

Feature Radiance Pod Typical Microcurrent Device Typical LED-Only Mask
Technologies 7-in-1: RF, EMS, Galvanic Ion, Electroporation, Ultrasound, LED (Red/Blue/Infrared), 3D Vibration Microcurrent (sometimes nanocurrent) LED wavelengths only
Dual-action with serums Designed for serum + energy synergy Requires conductive gel; skincare benefits depend on separate products Pairs with serums but no EMS/RF support
Areas of focus Lifting, firming, texture, brightness, contour Lifting/toning primarily Tone/brightness, clarity
Routine efficiency Multi-benefit in one session Single-modality sessions Light-only sessions
Before and after results showing improved firmness and skin glow with Radiance Pod

More From Pure Tone Aesthetics

Microcurrent Skincare Tools Compared

Everything You Need to Know About Using the Radiance Pod

How often should I use Radiance Pod?

Daily use is ideal for most people. Consistency compounds results — use it as part of your routine with Radiance Ampoule and apply Face-Up Gel section-by-section for smooth glide and effective energy transfer.

Do I need Face-Up Gel every time?

Yes. Face-Up Gel helps the device glide comfortably and supports effective energy transfer from device to skin. Apply it only to the area you’re treating, then re-apply as you move to the next section.

Should I use Radiance Ampoule before the gel?

Yes — apply a thin, even layer of Radiance Ampoule first across face and neck, then add Face-Up Gel in sections as you treat. This keeps your actives in place while the gel maintains conductivity and comfort.

Which mode should I start with?

If you’re new, start with Boosting (BT) on a lower intensity for comfort. Once you’re used to the sensation, add Lifting (LT) and Tightening (TT), or use Total Course (TC) for an automatic full session.

How long is a typical session?

A complete session is usually around 9–10 minutes depending on your mode choice and the areas you treat. Work slowly and evenly, using gentle upward motions and fresh gel as needed.

Can I use Radiance Pod on my neck and jawline?

Yes — the jawline and neck are ideal areas. Use light pressure, keep the device moving with upward strokes, and ensure there’s enough gel so the head stays in smooth, even contact with the skin.

Can I use Radiance Pod around the eyes?

Use around the orbital bone area only and avoid the eyelids. Keep intensity low, apply sufficient gel, and use gentle, controlled movements. If your skin is sensitive, focus on the cheekbone/temple area rather than close to the lash line.

Is it suitable for sensitive skin?

Yes. Start on the lowest settings, increase gradually, and always use enough gel to minimise friction. If you’re prone to reactivity, keep your skincare simple on treatment days.

Can I combine Radiance Pod with the Pure Tone Glow LED Mask?

Yes — they complement each other. Many people use Radiance Pod for lifting/firming and absorption support, and use Glow for consistent LED light therapy benefits. If using both in one day, keep it comfortable and use gentle settings.

Can I use Radiance Pod after aesthetic treatments?

Once the skin has fully recovered and any practitioner downtime guidance is complete (often around 5–7 days depending on treatment), you can restart gently at the lowest intensity. If unsure, confirm with your practitioner.

Build your results routine

Radiance Pod + Radiance Ampoule + Viveca Cleanse

Ready to build your new skincare routine?

Explore our full range of professional-grade at-home skincare tools and find the right solution for your skin goals.

Shop All Pure Tone Skincare Tools

For skin that makes you look and feel your best

Sign-up for the Pure Tone Aesthetics Members Club and follow us on Instagram and Facebook for the latest news, special offers and new product launches!

Back to blog