For many skin rejuvenation concerns, a course of 3 treatments approximately 4 weeks apart is commonly recommended. The exact treatment plan should always be tailored to the client, treatment area, skin condition and desired outcome.

RF Microneedling delivers radiofrequency energy directly into the skin through fine microneedles, allowing controlled thermal energy to be delivered at a selected depth.

Monopolar RF is completely non-invasive. RF energy is delivered through the surface of the skin to create controlled heating within the underlying tissue without the use of needles.

The RF Microneedling handpiece uses resistive, or Joule, heating. Radiofrequency electrical energy is delivered through the microneedles into the target tissue, where electrical resistance converts the energy into controlled heat.

The RF Microneedling handpiece operates at a fixed frequency of 5MHz.

The Monopolar RF handpiece is separate and offers selectable 5MHz and 8MHz frequencies.

No. RF energy is delivered in controlled pulses during each microneedling insertion.

The RF Microneedling pulse width is adjustable from 250–600ms, allowing the practitioner to tailor energy delivery according to the treatment protocol.

Needle depth is adjustable from 0.5–4.0mm, allowing treatments to be adapted for different areas and treatment objectives.

The microneedles measure approximately 0.18mm in diameter at the widest point of the shaft, tapering to an extremely fine 0.01mm tip.

Insulated needles are designed to concentrate RF energy towards the exposed section of the needle, allowing energy to be delivered more selectively into deeper tissue while reducing RF heating along the insulated portion of the shaft.

Non-insulated needles deliver RF energy along a greater proportion of the needle length, allowing thermal energy to be distributed across multiple levels of the treated tissue.

Therma Fusion Pro supports both insulated and non-insulated cartridges, giving practitioners greater flexibility when developing treatment protocols.

Therma Fusion Pro supports 10, 25, 36, 49 and 64-pin cartridges, allowing practitioners to select an appropriate cartridge for different facial and body treatment areas.

Microneedling cartridges are single-use disposable treatment heads and must not be reused between clients.

The integrated vacuum system gently draws the skin towards the microneedling cartridge before needle penetration. This helps support consistent contact, controlled penetration and more even treatment across the selected area.

Each Monopolar RF treatment head contains 1,000 RF shots and is designed for up to 30 treatments when correctly cleaned and disinfected between clients.

If the full 30-treatment capacity is used, this equates to an average of approximately:

1,000 shots ÷ 30 treatments = 33 RF shots per treatment.

Actual shot usage can vary according to the treatment area and protocol.

These RF shots should not be confused with HIFU shots; they simply represent individual Monopolar RF energy deliveries.

Yes. The Monopolar RF heads are non-invasive and can be reused between clients, subject to correct cleaning and disinfection procedures.

This is different from the RF Microneedling cartridges, which are single-use disposable treatment heads.

Four sizes are supplied:

5 × 5mm, 10 × 10mm, 20 × 20mm and 40 × 40mm.

This allows the practitioner to select a treatment head appropriate to smaller facial areas through to larger face and body treatment areas.

The Monopolar RF energy output time is adjustable from 1000–3000ms.

The handpiece also allows selection between 5MHz and 8MHz RF frequencies, giving the practitioner additional control over treatment parameters.

The dedicated Cryo Cooling handpiece is designed to cool and soothe the treatment area and can be used before, during or after treatment to help improve client comfort and manage post-treatment heat and redness.

Depending on the treatment mode and protocol, Therma Fusion Pro can be used to support improvements in the appearance of:

• fine lines and wrinkles
• skin laxity
• uneven or rough skin texture
• enlarged pores
• acne scarring
• stretch marks
• uneven-looking skin tone
• facial and jawline definition

Downtime depends on the treatment selected and the intensity used.

Monopolar RF is non-invasive and generally involves minimal downtime.

RF Microneedling is minimally invasive, so temporary redness, warmth and mild swelling can occur following treatment. The Cryo Cooling handpiece can be used to help cool and soothe the skin afterwards.

Yes. Therma Fusion Pro includes in-person CPD-certified training delivered by our qualified training team, together with supporting training materials and ongoing technical and clinical support.

Therma Fusion Pro RF Microneedling & Monopolar RF Treatment Machine with Cryo Cooling Technology

• RF Microneedling Handpiece
• Monopolar RF Handpiece
• Cryo Cooling Handpiece

Non-Insulated RF Microneedling Cartridges – Single Use

• 1 x 10 Pin (5 x 2)
• 1 x 25 Pin (5 x 5)
• 1 x 36 Pin (6 x 6)
• 1 x 49 Pin (7 x 7)
• 1 x 64 Pin (8 x 8)

Monopolar RF Cartridges – Up to 30 Uses

• 1 x 5mm x 5mm
• 1 x 10mm x 10mm
• 1 x 20mm x 20mm
• 1 x 40mm x 40mm

Yes. Contact us about our competitive monthly lease purchase plans from just £12.33 per day, with full training, technical support, free software upgrades and extended warranty. Call 0330 102 5578 or complete the Contact Us form for pricing and terms and conditions.

Enjoy peace of mind with our 2 year extended warranty coverage, ensuring your investment is protected.

• UK Delivery 3 Days. Units ordered within the UK and with a UK delivery address will be hand delivered and set-up by a Pure Tone Aesthetics technician. (Excludes Northern Ireland. Please contact us for shipping costs to Northern Ireland)
• International Delivery 7 Days. International orders will be shipped by Fedex or similar courier. Please contact us for a quotation based on your location.
• For full delivery & returns information click here

Technical Specifications

Product Type: RF Fractional Microneedling & Monopolar RF with Cryo Cooling Technology

• Energy Source: Radio Frequency (RF)
• System Power: 10–400W
• RF Heating Mechanism: Resistive (Joule) heating
• Energy Delivery: Pulsed RF

RF Fractional Microneedling

• RF Frequency: 5MHz fixed
• Needle Depth: 0.5–4.0mm adjustable
• Pulse Width: 250–600ms adjustable
• Needle Diameter: Approx. 0.18mm at the widest point of the shaft
• Needle Tip: Approx. 0.01mm
• Microneedle Cartridge Types: Insulated & Non-Insulated
• Microneedle Configurations: 10, 25, 36, 49 & 64 pin
• Cartridge Use: Single-use disposable
• Vacuum-Assisted Delivery: Yes

Monopolar RF

• RF Frequencies: 5MHz / 8MHz selectable
• Pulse Width / Energy Output Time: 1000–3000ms adjustable
• Treatment Head Sizes: 5 × 5mm, 10 × 10mm, 20 × 20mm & 40 × 40mm
• Treatment Head Capacity: 1,000 RF shots
• Treatment Head Use: Up to 30 treatments
• Average RF Shots per Treatment: Approx. 33 shots when used across 30 treatments